Reivax Maquinas - Wire forming machines manufacturer to produce 2D and 3D parts.

Menu

Manufacturing wire parts Wire bending Straighten and cut
Wire welding Motorized uncoilers Feeders
Heads  Contact English - Espaol

Information about the machines and accessories for manufacturing wire parts.

We enclose descriptions, features and requirements to be able to answer questions about the machines and accessories we manufacture.

 

**********************************

3D-CN-8 / 3D-CN-8-M

**********************************

Machines description: 3D-CN-8 / 3D-CN-12.

CN machine to bend wire and manufacture 2D and 3D parts.

CN machine to bend wire and manufacture 2D and 3D parts. 4 Axis. Model 3D-CN-8. Reivax Mquinas.

Show video

It is a wire rod bender to CN.
Basically it is a bench that is equipped with bending mechanisms and tools and all this is controlled by a PLC.
The bending is done by means of an arm that allows the rod to rotate 360 and a rotating head that allows 4 bending radii.
Both the arm and the bending head are programmable and allows to manufacture countless models with a high quality of finishes.
There are different versions.
According to the feeding system:
    - Manual Cut Rod.
    - Automatic by roll and from motorized winder.
According to the thickness and hardness of the wire:
Model Wire Hardness wire
3D-CN-8 2 to 8 mm 1200 N / mm2
3D-CN-12 5 to 12 mm 1200 N / mm2
It is programmed from touch screen,
   The programming is sequential, very fast, and easy for the operator.
   It is designed so that all operating cycles, movements and times can be created or modified.
   It allows to store the programmed models.
   The screen displays all the necessary information on production and incidents.
   It allows an easy and fast change of models.
   It has a remote control module installed to be operated via the Internet.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine.

 

Machines performance: 3D-CN-8 / 3D-CN-12.

CN machine to bend wire and manufacture 2D and 3D parts.

 Feeding:  
     - Cut rod - Manual Yes
     - Wire roll - Automated Optional
  Wire / Rod: According to the model 2 to 12 mm
 Wire / Rod: Hardness 1200 N/mm2
 Sequential movement programming Yes
 CN servos Yes
 Tool changes 4
 Bending radii 4
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

CN machine to bend wire and manufacture 2D and 3D parts.

3D-CN-8 / 3D-CN-12

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
- Wire parts to produce: Drawings, measurements and tolerances.
- Machine model according to wire thickness:
       - 3D-CN-8    - Wire 2 to 8 mm.
       - 3D-CN-12  - Wire 5 to 12 mm.
- Machine model according to the feeding system:
       - Cut rod -  Manual
       - Wire roll - Automated
- Option: Include a motorized uncoiler for wire roll: Yes of 1000. 2000, 3000 Kg. or No.
- Option: Include a straightening and cutting machine to make the rods: Yes or No.
- Additional comments:
       - Voltage
       - Production estimates: Parts / Hour.
       - Special needs.

      Contact: info@reivaxmaquinas.com - Form

 

**********************************

ACN-8 / ACN-16

**********************************

Machines description: ACN-8 / ACN-16.

CN wire feeder / Drag box.

CN wire feeder / Drag box.   1 to 8 mm. Model ACN-8. Reivax Maquinas.

CN wire feeder / Drag box.  5 to 16 mm. Model ACN-16. Reivax Maquinas.

Show video

The wire feeder is an autonomous unit to CN.
It is mounted on a 4-roller drag box and equipped with an electrical panel, PLC with touch screen and control drivers.
It has two versions depending on the thickness of the wire:
Model Wire
  ACN-8   1 to 8 mm
  ACN-16   5 to 16 mm
It is characterized by:
   Its robustness, reliability, precision and minimum maintenance.
   Its fast and programmable speed: up to 80 or 150 meters per minute depending on the model.
   Its external encoder allows exact control of the feed length.
   Extreme drag accuracy.
   Fast assembly and adjustment of wire thickness.
The feeder may be preceded by a wire straightener that is optional and this by a motorized winder (optional).
The feeder communicates with the PLC.
From the PLC:
   It is programmed from touch screen,
   Programming is very fast and easy for the operator.
   The screen displays all the necessary information on production and incidents.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine.

 

Machine performance: ACN-8 / ACN-16.

CN wire feeder / Drag box.

 

Model
ACN-8 ACN-16
  Wire / Rod 1 to 8 mm 5 to 16 mm
 Feeding speed: Meters / Minute 0 - 150 0 - 80
 CN Servo Yes Yes
 Feeding precision +- 0,1 mm +- 0,2 mm
 Trailed rollers 4 4
The machine:    
     - Measurements: Length - width - height To consult To consult
     - Weight To consult To consult
     - Installed potency To consult To consult
     - Voltage On request On request

 

Information needed to make an inquiry or request a quote.

CN wire feeder / Drag box.

ACN-8 / ACN-16

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
- Machine model according to wire thickness:
      - ACN-8.    Wire 1 to 8 mm
      - ACN-16. Wire 5 to 16 mm
- Maximum feeding speed: Meters / Minute.
- Option: Include a motorized uncoiler for wire roll: Yes of 1000 2000 or 3000 Kg. or No.
- Additional comments:
      - Voltage
      - Special needs.

    Contact: info@reivaxmaquinas.com - Form

 

**********************************

AS-R1

**********************************

 

Machine description: AS-R1.

Machine to manufacture: Wire handles with plastic container insert.

Machine to manufacture: Wire handles with plastic container insert. Model AS-R1. Reivax Mquinas.

Show gallery

The machine:
   - Shapes the handle from cut rod.
   -  You have the option of inserting a plastic grip to the handle (optional).
   - Mount the handle to the plastic container. Both cold, and when leaving the injection machine.
Entries:
   - Plastic containers are deposited on the continuous input belt.
   - Cut rods are deposited in the rod hopper.
   - Plastic grips are deposited in a vibrating handle hopper (Optional).
Output;
   - Plastic containers with the handle inserted.
Process:
   1 / The plastic container moves and orientates on the tape.
   2 / The handles are manufactured: The cut rod is shaped and the plastic handle is inserted.
   3 / The handle is mounted in the plastic container.
   4 / The plastic container with the handle mounted moves to a tape where it is stacked.
Capability:
   - Ideal for coupling at the exit of the plastic injector. (Hot)
   - The machine can give service to several injectors when being able to move with wheels.
   - Changing the tools you can make different models of handles.
The feeding of the plastic grip for the insertion to the handle can be:
   - Manual: The operator positions the grips and feeds the machine.
   - Automatic: (Optional) The machine is equipped with a hopper, a vibrator and the tools to position the grips and feed the machine.
The machine is governed by a PLC:
   - It is programmed from touch screen.
   - The programming is sequential, very fast, and easy for the operator. It is designed so that all operating cycles, movements and times can be created or modified.
   - It allows to store the programmed models.
   - The screen displays all the necessary information on production and incidents.
   - It allows an easy and fast change of models.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine.

 

Machine performance: AS-R1.

Machine to manufacture: Wire handles with plastic container insert.

 Feeding: Cut rod
  Wire / Rod 2 to 5 mm
 Wire / Rod: Hardness 800 N/mm2
 Wire / Rod: Length 200 to 700
 Estimated production: Handles / Hour +- 800
 Insertion of the plastic grip to the handle Yes
 Automatic feeding of plastic handles Optional
 The machine:  
    - Measurements: length - width - height +- 3,5 x 1,2 x 1,9 m.
    - Weight +- 550 Kg.
    - Installed potency +- 5 Kw.
    - Voltage On request.

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Wire handles with plastic container insert.

AS-R1

- Customer data: Company, contact person, Web, telephone and e-mail.

- Wire / Rods: Thickness, hardness and specifications.
- Wire handles: Drawings, measures and tolerances.
- Plastic grips: Drawings, measures and tolerances.
- Plastic containers: Drawings, measures.
- Option: Insertion the grip in wire handle: Yes or No.
- Optional: Include a straightening and cutting machine to make the rods: Yes or No.
- Optional: Include a motorized uncoiler for wire roll: Yes or No
- Additional comments:
     - Voltage.
     - Production estimates: Handles / Hour
     - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

AS-R2

**********************************

 

Machine description: AS-R2.

Machine to manufacture: Wire handles for plastic containers.

Machine to manufacture: Wire handles for plastic containers. Model ASR-2. Reivax Maquinas.

Show video

Fabrication process:
The machine is governed by a programmable PLC.
It is fed by cut rods or by roll from motorized uncoiler.
If the feeding is by cut rod:
   The machine is equipped with a hopper and feeding mechanisms.
If the feed is per roll from motorized uncoiler:
   The machine is equipped with a CN drag box, a straightener and a cutting module.
   The wire is straightened, cut to size and follows the cut rod process.
   The motorized uncoiler is optional.
In a first step, at the entrance of the rod:
   The plastic grip is inserted into the handle.
In a second step:
   Sausages are made at the ends of the handles.
In a third step:
   The handle is formalized and ejected.
The machine:
   It is a hydraulic wire bender with tools.
   Basically it is a bench that is equipped with a wire feed system, bending and finishing tools, ejection mechanisms and all this is controlled by a PLC.
   You can manufacture virtually all models of handles, with high production and high quality finishes.
There are two versions of the machine depending on the wire feeding system:
Model Feeding:   Wire  Production / Hour
AS-R2-V Cut rod 2 to 5 mm +- 1600
AS-R2-R Wire roll 2 to 5 mm +- 1600
The feeding of the plastic grip for the insertion to the handle can be:
    - Manual: The operator positions the handles and feeds the machine.
    - Automatic: (Optional) The machine is equipped with a hopper, a vibrator and the tools to position the grips and feed the machine.
There is the option to make the different finishes at the ends of the handles:

Bend ends model and or Notches ends model

The machine is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, very fast, and easy for the operator. It is designed so that all operating cycles, movements and times can be created or modified.
   It allows to store the programmed models.
   The screen displays all the necessary information on production and incidents.
   It allows an easy and fast change of models.
   It has a remote control module installed to be operated via the Internet.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine

 

Machine performance: AS-R2.

Machine to manufacture: Wire handles for plastic containers.

 Feeding:  
     - Cut rod Optional
     - Wire roll Optional
  Wire / Rod: 2 to 5 mm
 Wire / Rod: Hardness 800 N/mm2
 Rod length 200 to 800
 Estimated production: Handles / Hour:  
     - Cut rod feed +- 1600
     - Wire roll feed +- 1600
 Insertion of the plastic grip to the handle Optional
 Automatic feeding of plastic grip Optional
 Handle finishes:  
     - Bend ends model Optional
     - Notches ends model Optional
 The machine:  
     - Measurements: length - width - height +- 3,3 x 1,7 x 2,2 m.
     - Weight +- 2,200 Kg.
     - Installed potency +- 14 Kw.
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Wire handles for plastic containers.

AS-R2

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Wire handles: Drawings, measures and tolerances.
- Plastic grips: Drawings, measures and tolerances.
- Machine version according to feeding system:
      - Cut rod. 
      - Wire roll.
- Option: Insertion the grip in wire handle: Yes or No.
- Option: Automatic feeding of plastic grips: Yes or No.

- Machine version according to the ends:

      - Option: Bend ends model: Yes or No.
      - Option: Notches ends model: Yes or No.
- Optional: Include a straightening and cutting machine to make the rods: Yes or No.
- Optional: Include a motorized uncoiler for wire roll: Yes or No.
Additional comments:
      - Voltage
        - Production estimates: Handles / Hour.
       - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

CH-P-10

**********************************

Machine description: CH-P-10.

Head to make bevels and chamfers at the end of the wire rod.

Cabezal para hacer biseles y chaflanes en el extremo de la lavarilla de alambre. Modelo CH-P-10 de Reivax Mquinas.

Show video

The head is an autonomous unit that serves to make the chamfers at the ends of the wire rod.
The head and an electrical control panel are mounted on a frame.
The electrical panel allows to control the speed of the blades.
The Head:
   It communicates with the machine it serves through a PCL.
   It is robust, reliable, accurate and of minimum maintenance.
   It has 3 standard and interchangeable blades.
   By means of a threaded stop, it controls the length of the chamfering.
   It incorporates a blower for the ejection of the chip.
   It can work dry without refrigerant.
   It can be complemented with a jaw (optional) to fix the rod and extend the life of the cutting blades.
   It can make different forms of chamfering by changing the head.
   It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine

 

Machine performance: CH-P-10.

Head to make bevels and chamfers at the end of the wire rod.

  Wire / Rod 2 to10 mm
 Cutting blades 3
 Chip ejection Blow
 Work dry without refrigerant Yes
 Example speed: 2mm chamfer 0,3 seconds
 Pneumatic clamp for wire rod Optional
 The head:  
     - Measurements: Length - width - height +- 0,6 x 0,3 x 0,45 m.
     - Weight +- 60 Kg.
     - Installed potency +- 1,5 Kw.
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Head to make bevels and chamfers at the end of the wire rod.

CH-P-10

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Optional: Clamping jaws: Yes or No.
- Additional comments:
      - Voltage
      - Production estimates: Parts / Hour
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

CH-V-10

**********************************

 

Machine description: CH-V-10.

Head to make bezels and regattas in the middle of the wire rod.

Head to make bezels and regattas in the middle of the wire rod. Model CH-V-10. Reivax Maquinas.

Show video

This chamfer is an autonomous unit used to make double chamfers or races in the middle of a wire rod.
It is mounted on a frame and equipped with a head, electric control panel.
The head of double chamfers or races:
   It is robust, reliable, precise and with minimal maintenance.
   It has 3 standard and interchangeable blades.
   Through a threaded stop, it controls the cutting depth with extreme precision.
   It incorporates a blower for ejecting the chip.
   Can work dry without refrigerant.
   It has a jaw to fix the rod and lengthen the life of the cutting blades.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.  
It is a robust, productive and minimal maintenance machine

 

Machines performance: CH-V-10.

Head to make bezels and regattas in the middle of the wire rod.

 
  Wire / Rod 3 to10 mm
 Cutting blades 3
 Chip ejection Blow
 Work dry without refrigerant Yes
 Example speed: Regatta 6 x 1,5 mm 0,3 seconds
 Pneumatic clamp for wire rod Yes
 The machine:  
     - Measurements: Length - width - height +- 0,5 x 0,35 x 0,6 m.
     - Weight +- 60 Kg.
     - Installed potency +- 1,5 Kw.
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Head to make bezels and regattas in the middle of the wire rod.

CH-V-10

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Additional comments:
      - Voltage
      - Production estimates: Parts / Hour
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

CM-12-CN

**********************************

 

Machine description: CM-12-CN.

Multifunction CN head to make threads, bevels, chamfers, bends and springs on the wire rod.

Multifunction CN head to make threads, bevels, chamfers, bends and springs on the wire rod. Model CM-12-CN. Reivax Maquinas.

Show video

This autonomous unit that serves to make various functions in the wire rod.
It is mounted on a bench and is equipped with the head, electrical panel, screen and control drivers.
The head:
It is multifunctional: you can attach different optional tools for:
   Threading function by rolling different metrics
   Screw start function of different metrics
   Chamfered edge function
   Function to bend on axis
   Roll-up function (Springs)
For the function of threading by rolling, it is necessary to know the metrics for their special quotation.
For the functions of bending and winding (springs) it is necessary to automate the feeding with a drag box (Optional).
It can be complemented:
   With a clamp to fix the rod (Optional)
   With a stop for the rod (Optional)
The head is characterized by:
   Robustness, reliability, precision and minimal maintenance.
   You can synchronize with any element.
   The fast and programmable speed.
   Speed ​​in the execution of the function.
The head communicates with the PLC.
From the PCL:
   It is programmed from touch screen.
   The programming is very fast and easy for the operator. It is designed so that all the operating cycles, movements and times can be created or modified.
   All the necessary information of the production and incidents is displayed on the screen.
   It allows an easy and quick change of parameters.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machine performance: CM-12-CN.

Multifunction CN head to make threads, bevels, chamfers, bends and springs on the wire rod.

  Wire / Rod 3 to 12 mm
 CN Axis 2
 Threads: Metric M-3 to M-12 (1)
 Threads: Length  5 to 60 mm (1)
 Springs: Length  10 to 40 mm /1)
 Functions / Tools:  
      - Chamfer or bevel end Optional
      - Thread by chip removal Optional
      - Threading by rolling Optional
      - Doblar sobre eje Optional
     - Bend on axis Optional
 The head::  
     - Measurements: Length - width - height +- 0,65 x 0,2 x 0,4 m.
     - Weight +- 65 Kg.
     - Installed potency +- 2,5 Kw.
     - Voltage On rquest
 (1) Other lengths: To consult  

 

Information needed to make an inquiry or request a quote.

Multifunction CN head to make threads, bevels, chamfers, bends and springs on the wire rod.

CM-12-CN

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Drawings, measures and tolerances of the parts
- Option: Tool for chamfers YES or NO.
- Option: Opcion: Tool for thread withd cutting die: YES metric and length or NO.
- Option: Tool for thread for lamination: YES metric and length or NO.
  Option: Tool for bender: YES or NO.
  Optcion: Tool for wire roll: YES or NO.
  Option: Clamping jaws: YES or NO.
  Option: Rod stop: YES or NO.
  Option: Motorized uncoiler: YES of 1000 / 2000 / 3000 Kg. or NO
  Additional comments:
      - Voltage
      - Production estimates: Parts / Hour
      - Special needs.

 

**********************************

D-CN-10-M / D-CN-16-M

**********************************

Machines description: D-CN-10-M / D-CN-16-M.

CN machine for manual bending of wire rod.

CN machine for manual bending of wire rod. Model D-CN-16-M. Reivax Maquinas.

 Show video

It is a horizontal rod bending table with programmable rotary plate with Numerical Control.
It allows an easy and fast preparation and a great folding facility.
In the table:
   The operator must only insert the bending nucleus, fix the support tools and put the stop for the bending.
   There are several races in the form of 'T' to be able to screw the different tools in any position.
The bending head:
   It consists of a programmable rotating plate CN and where the bending nucleus of the rod is fixed.
   The machine includes 4 nucleus with different bending radius.
   It is governed by a servomotor.
   It allows programming up to 10 program steps, to be able to manufacture pieces with 10 different folds.
Mobile stop to position rod:
   It's optional.
   It is programmable by numerical control and is automatically positioned for each fold.
   Allows you to program up to 10 different positions.
This machine is characterized:
   Easy and quick change of bending tools.
   Easy and fast programming by the operator.
   It is universal, versatile and the costs of the tools are economic.
   The arrangement of bending tools and programming allow an infinite number of combinations.
   Guarantees a perfect dimensioning.
   It is ideal for the manufacture of short series and prototypes.
The machine is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, very fast and simple. It is designed so that the operator can create or modify all operating cycles, movements and times.
   It supports up to 10 different consecutive angles, as well as varying the speeds of each bend.
   It allows to store the programmed models.
   All the necessary production and incident information is displayed on the screen.
Versions:
   There are versions of the machine depending on the thickness and hardness of the rod:

  Model

Wire Wire hardness
  D-CN-10 M / 800 1 to 10 mm 800 / mm2
  D-CN-10 M / 1800 1 to 10 mm 1800N / mm2
  D-CN-16 M / 800 1 to 16 mm 800 / mm2
  D-CN-16 M / 1800 1 to 16 mm 1800N / mm2
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.

 

Machine performance: D-CN-10-M / D-CN-16-M.

CN machines for manual bending of wire rod.

 Manual feeding Cut rod
  Wire rods 1 to 16 mm.
 Hardness wire rods N/mm2 500 to  1800 N/mm2
 Sequential programming movements 10
 Different bending angles 10
 CN Servos Yes
 CN Mobile Stop - Different positions (Optional) 10
 The machine:  
   - Measures: Length - width - height +- 1,3 x 0,7 x 1 m.
   - Weight +- 900 Kg.
   - Installed power +- 7 Kw.
   - Voltage On request

 

Information needed to make an inquiry or request a quote.

CN machines for manual bending of wire rod.

D-CN-10-M / D-CN-16-M
- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Machine model:
       D-CN-10: Wire 1 to 10 mm.
       D-CN-16: Wire 1 to 16 mm.
- Hardness wire: Up 800N / mm2 or up 1800N / mm2.
- Option: Stop with 10 different positions by numerical control: Yes or No.
- Additional comments:
      - Voltajge
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

DH-1000 / DH-2000 / DH-3000

**********************************

 

Machines description: DH-1000 / DH-2000 / DH-3000.

Hydraulic machine for bending wire and manufacturing 2D and 3D parts.

Hydraulic machine for bending wire and manufacturing 2D and 3D parts. Model DH-1000. Reivax Mquinas.

Show video

It is a hydraulic wire bender with tools, programmable, which can manufacture many models, with high production and high quality finishes.
Basically it is a bench that is equipped with a wire feeding system with straightener, folding tools with different accessories, all controlled by an easily programmable sequential program.
There are three versions of the machine according to the length of the bench:
   Versions: 1, 2, and 3 meters of bench so that it can house the piece to be manufactured and the tools that are needed.
There are two machine versions depending on the wire feed system
   Version: Feeding with cut rod:
      The machine is equipped with a hopper for cut rods and their feeding mechanisms.
   Version: Feeding with wire roll:
      The machine is equipped with a CN drive box and a wire straightener.
      This option can be supplemented with an optional motorized uncoiler.
This machine is characterized:
   It can manufacture complex parts, for each format it is equipped with the necessary tools and accessories and it is programmed quickly by the operator.
   It is a universal machine: On the bench it is possible to assemble a large number of hydraulic trucks, servos, pneumatic mechanisms, accessories (bending, threading, chamfering, presses, welding groups, etc.).
   It allows a large production, is versatile and the costs of the tools are reasonable.
The machine is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, very fast, simple. It is designed so that the operator can create or modify all operating cycles, movements and times.
   The system allows controlling up to 40 elements (Cylinders, motors, etc.) and up to 20 servomotors.
   It allows storing the programmed models.
   All the necessary information of the production and incidents is displayed on the screen.
   It has a remote control module installed to be operated via the internet.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machine performance: DH-1000 / DH-2000 / DH-3000.

Hydraulic machine for bending wire and manufacturing 2D and 3D parts.

 Automated feeding:  
     - Cut rod Optional
     - Wire roll Optional
 Bed size according to the model machine: 1,2 - 2 - 3 meters
  Wire according to the model machine 1 to 16 mm
 Wire: Hardness 1200 N/mm2
 Parts finishes: Thread, chamfer, bevel, press, weld, others Optional
 Sequential movement programming Yes
 CN Servos Yes
 Store scheduled models Yes
 Remote control Internet Yes
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Hydraulic machine for bending wire and manufacturing 2D and 3D parts.

DH-1000 / DH-2000 / DH-3000

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications. 
- Wire parts: Drawings, measures and tolerances.
- Drawings, measures and tolerances of the parts.
- Machine version: Structure: 1,2, 2 or 3 meters.
- Feeding option: Cut rod or wire roll.
- Optional: Include a motorized uncoiler for wire roll: Yes or No.
- Additional comments:
        - Voltage.
        - Production estimates: Parts / Hour.
        - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

DH-2000-CN / DH-3000-CN

**********************************

 

Machines description: DH-2000-CN / DH-3000-CN.

CN machine to bend wire and manufacture 2D and 3D parts.

CN machine to bend wire and manufacture 2D and 3D parts. Model DH-2000-CN. Reivax Mquinas.

Show video

The machine:
   It is a CN wire bender with tooling, programmable, which can manufacture many models, with high production and high quality finishes.
   Optionally you can equip the machine, with a bending head to CN, and with a clamp to make the bent in 3 dimensions.
   The machine is fed from roll. Optionally it can be equipped with a motorized winder.
   Basically it is a bench of 2 meters with CN drag box, straightener, bending and finishing tools, ejection mechanisms and all this is controlled by a PLC.
   There can be several hydraulic trolleys as well as accessories in the base (Threading, chamfering, presses, welding groups).
This machinase characterizes:
   I was able to manufacture complex parts, for each part format it is equipped with the necessary tools and accessories.
  You can combine 3D heads with fixed tools
   It allows a large production and a reasonable cost of the tools.
The machine is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, very fast, simple. It is designed so that the operator can create or modify all operating cycles, movements and times.
   The system allows controlling up to 40 elements (Cylinders, motors, etc.) and up to 20 servomotors.
   It allows storing the programmed models.
   All the necessary information of the production and incidents is displayed on the screen.
   It has a remote control module installed to be operated via the internet.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machines performance: DH-2000-CN / DH-3000-CN.

CN machine to bend wire and manufacture 2D and 3D parts.

 Feeding Wire roll
 Bed size according to the model machine 2 - 3 meters
  Wire 1 to 8 mm
 Wire: Hardness 1200 N/mm2
 Parts finishes: Thread, chamfer, bevel, press, weld, others Optional
 Sequential movement programming Yes
 CN Servos Yes
 Store scheduled models Yes
 Remote control Internet Yes
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltaje On request

 

Information needed to make an inquiry or request a quote.

CN machine to bend wire and manufacture 2D and 3D parts

DH-2000-CN / DH-3000-CN

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Optional: Bent carriage, 3D CN clamp and cutting blade. Yes or No.
- Optional: Include a motorized uncoiler: Yes of 1000 / 2000 / 3000 Kg. or No.
- Additional comments:
      - Voltage
      - Production estimates: Parts / Hour.
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

DVM-1000 / DVM-2000 / DVM-3000

**********************************

 

Machines description: DVM-1000 / DVM-2000 / DVM-3000.

Motorized uncoiler for wire rolls.

Motorized uncoiler for wire rolls. Model DVM-1000. Reivax Maquinas.

Show video

It is equipped and controlled by an electronic system.
Doses the wire accurately, without stops or pulls.
The motor-reducer is equipped with a mechanical brake clutch, acting to prevent the reducer shaft from suffering sudden starts and braking.
The wire supply speed is adjusted for each piece.
Incorporates safety to avoid snagging.
It incorporates an emergency manual stop.
It can be attached to any type of machine.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance accessory.

 

Machines performance: DVM-1000 / DVM-2000 / DVM-3000.

Motorized uncoiler for wire rolls.

Version Motorized uncoiler for wire rolls
Wire roll Kind
Kg. mm Wire Corrugated
 DVM-1000 < 1000 350/1050 1 to 8 mm 1 to 6 mm
 DVM-2000 < 2000 400/1050 1 to 8 mm 1 to 6 mm
 DVM-3000 < 3000 400/1050 6 to 16 mm 6 to 16 mm

 

Information needed to make an inquiry or request a quote.

Motorized uncoiler for wire rolls.

DVM-1000 / DVM-2000 / DVM-3000

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire roll: Weight & Measures.
- Wire: Thickness, hardness and specifications.
- Wire uncoiler Model: 1000 o 2000 o 3000 Kg.
- Additional comments
      - Voltage.
     - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

Straighten

**********************************

 

Machine description: Wire straighten.

Straighteners: Roller straightener for wire rod.

Straighteners: Roller straightener for wire rod. Reivax Maquinas.

Show video

It is an accessory that serves to straighten the wire that feeds a machine.
The straightener is installed before a drag box (optional) and after a motorized winder (optional).
It consists of two bodies with several rollers, one body in horizontal position and another in vertical.
It is functional:
   Robust and easy to use.
   The rollers are adjusted by tightening screws.
   An eccentric mechanism allows the rollers to be opened in order to be able to thread the wire quickly.
Versions:
   To specify the straightener model it will be necessary to know: The thickness of the wire, type and specifications.
   This information will allow our department to specify the layout and quantity of rollers that the straightener must hold.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.

 

Machines performance: Wire Straighteners.

Straighteners: Roller straightener for wire rod.

  Wire / Rod: According to the model 0,3 to 16 mm
 The straighten  
     - Measurements: Length - width - heightMedidas To consult
     - Weight To consult

 

Information needed to make an inquiry or request a quote.

Straighteners: Roller straightener for wire rod.

Straighten

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
Optional: Include a CN wire feeder: Yes or No.
- Optional: Include a motorized uncoiler: Yes of 1000 / 2000 / 3000 Kg. or No.
- Additional comments:
      - Special needs.

 

**********************************

HCH-1

**********************************

 

Machine description: HCH-1.

Machine to manufacture: Construction frameworks - 'Formwork chairs' - 'High chairs'.

Machine to manufacture: Construction frameworks - 'Formwork chairs' -  'High chairs'. Model HCH-1. Reivax Maquinas.

Show video

Fabrication process:
   The machine is governed by a programmable PLC.
   It is fed from two entrances of wire and counts on its two boxes of drag and straighteners.
   For feeding, two optional motorized winders will be necessary.
   In a first step the wire of each entrance will be straightened and cut.
   If it is a frame of bent legs, the first bending will be done.
   With the rod of each entry, they will be crossed and welded together.
   Before the welding process, there is the option to insert the bullets at the ends of the legs.
   With the piece obtained it is transferred to a bending head to give it the definitive shape.After bending the finished piece is ejected from the machine, on a conveyor belt.
The machine:
   It is a hydraulic wire bender with tools.
   Basically it is a bench that is equipped with a wire feed system, bending and finishing tools, ejection mechanisms and all this is controlled by a programmable sequential program.
   Manufactures all models of HIGH CHAIRS (formwork chairs) from 2 "to 12".
   You can manufacture frames with smooth legs or with folded legs.
   You can insert the bullets at the ends of the legs (Optional)
   Easy change of measures of the frames, approx. 20 minutes.
   The welding is precise, reliable, admits different materials and does not cause deformations in the piece.
   It is characterized by precision, high production and high quality finishes.
It is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, fast, easy and open. It is designed so that the operator can create or modify all operating cycles, movements and times.
   The system allows controlling up to 40 elements (Cylinders, motors, etc.) and up to 5 servomotors.
   It allows storing the programmed models.
   All the necessary information of the production and incidents is displayed on the screen.
   It allows an easy and quick change of models.
   It has a remote control module installed, to be operated via the internet.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machine performance: HCH-1.

Machine to manufacture: Construction frameworks - 'Formwork chairs' - 'High chairs'.

 Feeding Two wire rolls
  Wire 2 to 8 mm
 Wire: Hardness 800 N/mm2
 Frame height (Formwork chairs) 2" to 12"
 Frame finishes:  
    - Smooth legs Yes
    - Curved legs Optional
    - Insert plastic plug to the soot legs Opcional
 Estimated production: Parts / Hour +- 1200
 Sequential movement programming Yes
 Store scheduled models Yes
 Remote control Internet Yes
 Welding type Resistence
 Time to change frame measures 20 minutes
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Construction frameworks - 'Formwork chairs' - 'High chairs'.

HCH-1

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Option: High chairs with smooth legs: Yes or No.
- Option: High chairs with curved legs: Yes or No.
- Option:  insertion the plastic bullet to the smooth legs: Yes or No.
- Plastic bullet: Drawings, measures and tolerances.
- Optional: Include a motorized uncoiler: Yes of 1000 / 2000 / 3000 Kg. or No.
- Additional comments:
      - Voltage.
      - Production estimates: Parts / Hour.
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MAA-5 / MAA-8 / MAA-5-1000-CN

**********************************

Machines description: MAA-3 / MAA-5 / MAA-8 / MAA-5-1000-CN.

Machines to manufacture wire rings: With welding and without welding.

Machine to manufacture: Wire rings. Mode MAA-5. Reivax Maquinas. CN Machine to manufacture: Wire rings.  1 to 8 mm. Model MAA-5-1000-CN. Reivax Maquinas.

Manufacture: Wire rings. 1 to 8 mm

Manufacture: CN  Wire rings. 2  a 5 mm

Show Videos

It is a wire bender, programmable, which can manufacture many models of ringas, with high production and high quality finishes.
Basically it is a bench that is equipped with a wire feeding system, bending tools and ejection mechanisms, controlled by a sequential program that is very easy to program.
There is the option to equip the machine to weld the rings.
The machine:
   It is fed from a motorized winder (Optional).
   It is characterized by:
      It allows an easy and fast resizing of rings.
      Great productivity
      Length accuracy (+ - 0.1 mm).
     The rings are very flat.
There is the option to change the size of the rings by Numerical Control
There are different models:
   According to the thickness of the wire (1 to 8 mm).
   Depending on the size of the rings (25 to 1000 mm).
   Depending on the finish of the rings: Closed or open (With or Without welding).
It is governed by a PLC:
   It is programmed from touch screen,
   Programming is fast, easy and open.
   It has a touch screen:
      Visualize all the necessary information of the production and incidents.
   It has a remote control module installed to be operated via the Internet.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine.
Welded hoop option (Closed):
   The finish is of an unbeatable quality of welding.
   It is for resistance.
   The machine allows to adjust the welding in: Intensity, time and pressure.
   The adjustments allow the welding to be optimized to the type of material, thickness and strength that the ring must withstand.
   The adjustments also allow to minimize burrs.
   Once adjustments have been made, supervision is minimal.
   Welding does not require added material.
The electrodes are long lasting and minimal cost.

 

Machines performance: MAA-3 / MAA-5 / MAA-8 / MAA-5-CN-1000.

Machines to manufacture wire rings: With welding and without welding.

 Feeding Wire roll
  Wire    - Depending on the version 1 to 8 mm
  Rings - Depending on the version 25 to 1000 mm
 Wire: Hardness 1200 N/mm2
 Sequential movement programming Yes
 Resize rings to CN Optional
 CN servos Optional
 Length accuracy +- 0.1 mm
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency  
         - Welding rings (Closed) + - 15,0 Kw
         - No welding rings (Open) + - 3,5 Kw
     - Voltage On request
   
 Machines to manufacture open wire rings (without welding),

 Model

Wire   Rings mm Change rings CN Production (1)
 MAA-3 1 to 3 mm 25 to 80 Yes +- 12000
 MAA-5 2 to 5 mm 40 to 600 Optional 2000 / 5000
 MAA-8 3 to 8 mm 50 to 600 Optional 2000 / 5000
 (1) Parts / Hour: Depends on the size of the rings and wire quality.
 
 Machines to manufacture closed wire rings(with welding),

 Model

Wire   Rings mm Change ARings  CN Production(1)
 MAA-5 (2) 2 a 5 mm 80 a 600 Optional 1300 / 2000
 MAA-8 (2) 3 a 8 mm 100 a 600 Optional 1000 / 1600
 MAA-5-1000-CN 2 a 5 mm 100 a 1000 Yes 800 / 1400
 (1) Parts / Hour: Depends on the size of the rings and wire quality.
 (2) Optin: Rings up 1000 mm
 
Optional: Include a motorized uncoiler for wire roll.

 

Information needed to make an inquiry or request a quote.

Machines to manufacture wire rings: With welding or Without welding.

MAA-3 / MAA-5 / MAA-8 / MAA-5-1000-CN

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire: Thickness, hardness and specifications.
- Rings: Drawings, measures and tolerances.
- Option Rings:With welding or Without welding.
- Model 
      - MAA-3: Wire 1 to 3 mm
      - MAA-5: Wire 2 to 5 mm
      - MAA-8: Wire 3 to 8 mm
- Option: Rings up 1000 mm: Yes or No.
  Option: Ring size change mechanism to CN: Yes or No.
- Optional: Include a motorized uncoiler: Yes of 1000 / 2000 / 3000 Kg. or No.
Additional comments:
      - Voltage
      - Producciorn estimas: Rings / Hour.
      - Special needs.

 

**********************************

MAQ-3D-CN-8 / MAQ-3D-CN-12

**********************************

 

Machine description: MAQ-3D-CN-8 / MAQ-3D-CN-12 machines.

CN machines to bend wire and manufacture 2D and 3D parts.

CN machine to bend wire and manufacture 2D and 3D parts. 4 Axis. Model MAQ-3D-CN-8. Reivax Maquinas.

Show video

It is a programmable CN wire bending machine that has 4 bending heads that allow bending with 4 different radios or live edge.
The machine allows the manufacture of an infinite number of models of parts with precise finishes and high quality.
It consists of: a bench, CN drag box and wire straightener, folding mechanisms, finishes, an electrical panel and a touch screen. All this is controlled by an easily programmable sequential program.
It allows making radios and folds by generation when synchronizing the feed with the bend, obtaining elliptical and spiral forms.
It is fed from roll and optionally can complement the machine with a motorized uncoiler.
Optionally it can be equipped with other heads and tools: Threading, chamfering, presses, etc.
There are different machine models according to the wire thickness.
It is governed by a PLC:
   It is programmed from touch screen.
   The programming in sequential graphic environment, very fast and easy for the operator. It is designed so that all the operating cycles, movements and times can be created or modified.
   It allows to store the programmed models.
   All the necessary production and incident information is displayed on the screen.
   The change of part model, once programmed and stored, is instantaneous, when the thickness of the wire is not changed.
   It has a remote control module installed to be operated via the internet.
You can programs in two ways:
   Programming by cycle: The operator programs on the touch screen sequences of advances, direction, stops, radii of bending and cutting.
   Manual programming: It is an innovative system since the operator performs the movements of the machine manually, they are memorized and are visible on the touch screen for editing.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machine performance: MAQ-3D-CN-8 / MAQ-3D-CN-12.

CN machines to bend wire and manufacture 2D and 3D parts.

  Wire R=1600 N/mm2 1 to 12 mm
 Advance length Undefined
 Precision wire feed +- 0,1 mm
 Maximun piece to conform 700 mm
 Folding heads 4
 Bending radii on core 1 to 25 mm
 Folding radius by generation 25 mm to  infinity
 Precision bending +- 0,05
 Step programmable part cycle 60
 Production start time:  
   - No change of wire 30"
   - With change of wire 15'
 Installed potency 35 KW
 Power supply: Voltages and frequencies On request

 

Information needed to make an inquiry or request a quote.

CN machines to bend wire and manufacture 2D and 3D parts.

MAQ-3D-CN-8 / MAQ-3D-CN-12

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Optional tools: threaded, chamfered, bending, weld, others?
- Model:
     -  MAQ-3D-CN-8:   Wire 2 to 8 mm.
     -  MAQ-3D-CN-12: Wire 5 to 12 mm.
- Optional: Include a motorized uncoiler: Yes of 1000 / 2000 / 3000 Kg. or No.
- Additional comments:
      - Voltage.
      - Production estimates: Parts / Hour.
      - Special needs.

 Contact: info@reivaxmaquinas.com - Form

 

**********************************

 MEC-5-CN-80 / MEC-8-CN-80

**********************************

 

CN machines description: MEC-5-CN-80 / MEC-8-CN-80.

CN Machines for: Straighten and cut custom wire.

CN machines for: Straighten and cut custom wire. Model- MEC-5-CN. Reivax Maquinas.

Show video

The machine:
   It consists of a CN drag box, a rotary wire straightener with nozzles, the servomotor cutting mechanisms and a cut rod expulsion mechanism. All this is controlled by a PLC.
   It is fed from a motorized winder (Optional)
Is characterized:
   For the precision of the cut rod length: + - 0.1 mm.
   For a clean cut.
   By the speed of feeding of the wire that is adjustable and can reach at 80 meters per minute with a perfect straightening.
   For the versatility and ease in changing rod length and / or thicknesses.
   Changing the length of a rod is very easy to do, it is not necessary to change the guides and position any stop, it is programmed by a touch screen.
   The machine supports different wire thicknesses by changing the drag rollers, the cutting nozzle and adjusting the straightener, this operation to change the thickness needs only + - 15 minutes.
There are different versions depending on the thickness of the wire:

Model

Wire Hardness wire
MEC-5-CN-80 2 to 5 mm 800 N/mm2
MEC-8-CN-80 4 to 8 mm 800 N/mm2
The length of the bench is determined by the maximum length of the rod to be cut.
It is governed by a PLC:
   - It is programmed from a touch screen.
   - Programming is quick, easy.
   - The screen displays all the necessary information on production and incidents.
It incorporates passive safety systems and an emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and minimal maintenance machine.

 

Machines performance: MEC-5-CN-80 / MEC-8-CN-80.

CN machines for: Straighten and cut custom wire.

 Feeding Wire roll
  Wire / Rod: According to the model 2 to 8 mm
  Wire / Rod: Hardness 800 N/mm2
 Sections 10 mm to 6 m
 Precision +- 0,1 mm
 Adjustable speed +- 80 m / minute
 Structure 1 a 6 meters
 Time to change length of sections from screen < 1 minute
 Time to change rod thickness +- 15 minutes
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Potencia To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

CN machines for: Straighten and cut custom wire.

MEC-5-CN-80 / MEC-8-CN-80

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire: Thickness, hardness and specifications.
Size of the structure: 1 to 6 meters.
- Model machine:
       - MEC-5-CN-80: Wire 2 to 5 mm.
       - MEC-8-CN-80: Wire 4 to 5 mm.
- Optional: Include a motorized uncoiler: Yes of 1000 / 2000 / 3000 Kg. or No.
- Additional comments:
      - Voltage
      - Production estimates: Parts - Meters / Hour.
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MM-10

**********************************

 

Machine description: MM-10.

Machine to manufacture: Wire frames or similar parts.

Machine to manufacture: Wire frames or similar parts. Model MM-10. Reivax Maquinas.

Show video

The machine:
It is a hydraulic wire bender with tools that works from cut rod.
Basically it is a bench that is equipped with tooling and bending heads.
It is controlled by an easily programmable sequential program.
The food is by cut rod and can be:
   Manual.
   Automatic:
    The machine is equipped with a hopper, the feeding and ejection system.
The standard is a bench of 1.5 meters with two or four heads. For other options consult.
This machine is characterized:
   It is programmed quickly by the operator.
   It is possible to process more than one piece simultaneously.
The machine is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, very fast, simple. It is designed so that the operator can create or modify all operating cycles, movements and times.
   All the necessary information of the production and incidents is displayed on the screen.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machine performance: MM-10.

Machine to manufacture: Wire frames or similar parts.

 Feeding:  
     - Wire cut - Manual Yes
     - Wire cut - automatic Optional
  Wire / Rod 1 to 10 mm
 Wire / Rod: Hardness 800 N/mm2
 Bench size 1,5 meters
 Bending heads 2 to 6
 Head bending force 10.000 Nmm
 Sequential movement programming Yes
 Remote control Internet Yes
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Wire frames or similar parts.

MM-10

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
- Wire parts to produce: Drawings, measurements and tolerances..
- Number of the bending head: 2 or 4 or others.
- Rod feeding: Manual or Automated.
- Additional comments:
      - Voltage
      - Production estimates: Parts / Hour.
      - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MR-8 / MR-8-M

**********************************

Machines description: MR-8 / MR-8-M.

Machines to manufacture paint rollers.

Machine to manufacture: Paint rollers. Model MR-8. Reivax Maquinas. Machine to manufacture: Paint rollers with assembling a plastic handle. Model MR-8-M. Reivax Maquinas.
Manufacture: Paint roller. Manufacture: Roller & Handle assembling.
Show videos
 
This machine is a hydraulic wire bender with tools.
You can manufacture countless roller models with different finishes: Thread, chamfer, etc. With high production and high quality finishes.
Basically it is a bench that is equipped with a wire feed system, bending and finishing tools, ejection mechanisms and all this is controlled by a programmable sequential program.
It is fed from a motorized winder (Optional)
There is the option of inserting the plastic handle into the roller in the manufacturing process:
   - The machine is equipped with a handle vibrator and insertion mechanisms.
   - The handle vibrator can be equipped with a soundproofing hood.
   - The machine can be equipped with a handle tank to feed the machine automatically.
   - It is governed by a PLC:
   - It is programmed from touch screen,
   - The programming is sequential, very fast and easy for the operator. It is designed so that you can create or modify all operating cycles, movements and times.
   - The system allows to control up to 40 elements (Cylinders, motors, etc.) and up to 5 servomotors.
   - It allows to store the programmed models.
   - The screen displays all the necessary information on production and incidents.
   - It allows an easy and fast change of models.
   - It has a remote control module installed, to operate via the Internet.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine.

 

Machines performance: MR-8 - MR-8-M.

Machine to manufacture: Paint rollers.

 Machine model: MR-8 MR-8-M
 Insertion of the handle to the roller No Yes
 Feeding Wire roll
  Wire / Rod 3 to 8 mm
 Wire / Rod: Hardness 1200 N/mm2
 Sequential movement programming Yes
 Finishes: Thread, Chamfer, Regatta, Others Optional
 Bell to soundproof the vibrator handles Optional
 Handle tank for automatic loading Optional
 Estimated production: Paint rollers / Hour 2000 / 3000 1400 / 1800
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Paint rollers.

MR-8 / MR-8-M
- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire: Thickness, hardness and specifications.
- Rollers to produce: Drawings, measures and tolerances.
- Plastic roller handles: Drawings and measures.
- Roller finishes: Thread, Chamfer, Regatta, Others.
- Option: Insert the handle to the roller: Yes or No.
- Option: Bell to soundproof the vibrator handles: Yes or No.
- Option: Handle tank for automatic loading: Yes or No.
- Option: Include a motorized uncoiler for wire roll: Yes of 1000 2000 or 3000 Kg. or No.
- Additional comments:
     - Voltage
     - Production estimates: Paint rollers / Hour
     -  Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MSA-4

**********************************

 

Machine description: MSA-4.

Machine to manufacture frameworks: Lampshades.

Machines for manufacturing frameworks: Lampshades. Model MSA-4

Details / Show video

The machine:
- Shapes the lampholder legs and welds them to the sheet washer.
- The number of legs and the angle between them is programmable to CN.
Entrance:
    - Sheet metal washers:
          They are loaded manually in a loader or in a hopper with vibrator that is optional for automatic positioning.
     - The wire from a motorized winder (Optional)
Departure:
     - Finished lampholder frame: Bent and welded legs to the washer.
Process:
1 / The washer is positioned.
2 / The wire rod:
     Go through a straightener, feed the machine with the drag box.
3 / The leg is welded to the washer:
    It is cut and folded into the lampholder's leg.
4 / The process of shaping the leg and welding the washer is repeated:
     As programmed to CN: Number of legs and angle between them.
5 / With the washer with welded legs:
    The lampholder frame is finally shaped.
6 / With the finished lampholder:
     It is ejected and deposited in storage medium.
     A new process begins.
Characteristics:
    - It allows an easy and fast change of models.
    - The amount of legs and angle between them is programmable to CN.
    - It allows to manufacture all the models of the market.
    - The change of models is possible in 10 minutes.
    - The finishes and welding are of great quality.
The machine is governed by a PLC:
    - It is programmed from touch screen.
    - The programming is sequential, very fast and easy for the operator.
    - It is designed so that all operating cycles, movements and times can be created or modified.
    - It allows to store the programmed models.
    - The screen displays all the necessary information on production and incidents.
    - It has a remote control module installed to be operated via the Internet.
It incorporates passive safety systems and emergency manual stop.
Complies with European regulations approved and required by the EC: Machines 98/37 / EEC.
It is a robust, productive and low maintenance machine.

 

Machine performance: MSA-4.

Machine to manufacture frameworks: Lampshades.

 Feeding:  
     - Wire roll 2 to 4 mm
     - Sheet washers 30 to 80 mm
 Lampholder legs 3 to 4
 Load of the washers:  
     - Manual: In charger Yes
     - Automatic: In hopper with vibrator Optional
 Welding type Resistence
 Estimated production: Lmapshades / hour 500 - 800
 Sequential movement programming Yes
 External adjustment button Yes
 Store the programmed models Yes
 Remote control Internet Yes
 The machines:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture frameworks: Lampshades.

MSA-4

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
- Sheet washers: Measures and specifications.
- Lampshades to produce: Drawings, measurements and tolerances.
Automatic feeding of washers: Yes or No.A
- Option: Include a motorized uncoiler for wire roll: Yes of 1000. 2000, 3000 Kg. or No.
- Additional comments:
     - Voltage.
     - Production estimates: Parts / Hour.
     - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MSF-20

**********************************

 

Machine description: MSF-20.

Machine to manufacture frameworks: Cage filters.

Machine to manufacture frameworks: Cage filters. Model MSA-4. Reivax Maquinas.

Show video

Fabrication process:
   The machine is powered by cut rods and welded rings.
   The operator introduces the rods manually and the machine positions them. to start the manufacturing process.
   Each time the operator manually positions a hoop, the machine welds it to the rods and positions the frame for the next hoop.
   Once the frame is finished, he is expelled.
The Machine:
   Basically it is a bench that is equipped with a positioning system of rods and rings, welding equipment, ejection mechanisms and all this is controlled by a PLC.
   It can manufacture different models of frames with high quality finishes.
   The welding carts are one-piece duralumin, and incorporates an anti-turn.
   The electrodes are isolated and regulation is easy
   There is the option of doing medium frequency welding (Inverter)
   The stretching system achieves a high quality finishes and a total straightness of the frames.
It is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, very fast and easy for the operator. It is designed so that all the operating cycles, movements and times can be created or modified.
   It allows storing the programmed models.
   All the necessary information of the production and incidents is displayed on the screen.
   It allows an easy and quick change of models.
   It has a remote control module installed to be operated via the internet.
The welder:
   The machine simultaneously makes 10 welds between the rod and the ring.
   The finish is of an unbeatable quality of welding.
   The machine allows to adjust the welding in: Intensity, time and pressure.
   The adjustments allow to optimize the welding to the type of material, thickness and resistance that the filter must support.
   Once adjustments have been made, supervision is minimal.
   Welding does not require added material.
   The electrodes are long lasting and have a minimal cost.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machine performance: MSF-20.

Machine to manufacture frameworks: Cage filters.

  Wire: Rod 3 to 5 mm
  Wire: Ring 2 to 5 mm
 Frameworks:  
      - Length 1 to 7 meters
      - Maximum number of rods 20
      - Frames 90 to 190 mm
 Simultaneous welding: Rod /Ring 10
 The machine:  
    - Measurements: Length - width - height +- 9 x 2 x 1,5 m
    - Weight +- 1300 Kg.
    - Installed potency 2 Trafos 100 Kva. / Uni.
    - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture frameworks: Cage filters.

MSF-20

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire rings: Thickness, hardness and specifications.
- Wire rods: Thickness, hardness and specifications.
- Filter Bag Cages: Drawings, measures and tolerances.
- Optional: Welding to medium frequency (Inverter): Yes or No.
- Optional: Include a straightening and cutting machine to make the rods. Yes or No.
- Optional: Include a machine to manufacture the rings.Yes or No.
- Optional: Include a wire motorized uncoiler: Yes 1000 / 2000 / 3000 Kg. or No.
- Additional comments:
       - Voltage
       - Special needs. 

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MST-10 / MST-20

**********************************

 

Machine description: MST-10.

Wire butt-welding machine.

Wire butt-welding machine. Model MST-10. Reivax Maquinas.

Show video

The machine allows to make welds, quick to test and totally reliable.
The operator previously regulates the welding voltage and time, and orientates the electrodes.
The work cycle is for the operator to position the pieces to be welded, operate the mechanism by means of a pedal and the machine will close the clamps to make the welding. After releasing and removing the already welded part, the cycle can be repeated.
There are two versions according to the thickness of the wire:
   MST-10: For wire thicknesses from 1 to 10 mm.
   MST-20: For wire thicknesses of 6 to 20 mm.
The welder:
   The soldering tips are round pivot and stainless steel for a long duration.
   The pivots are easy to orientate for each measurement of the piece to be welded.
   It allows welding different materials such as: mild steel, annealed, stainless steel. etc.
   A digital control allows to regulate the welding time and intensity of the current.
   It is precise, fast and almost cold, so it guarantees a minimum deformation of the material.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machines performance: MST-10.

Wire butt-welding machine.

  Wire / Rod 1 to 10 mm
 Welding type Resistence
 Tilt table work support Optional
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On Request

 

Information needed to make an inquiry or request a quote.

Wire butt-welding machine.

MST-10

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Optional: Tilting work table: Yes or No.
- Additional comments:
      -Volyage.
      -Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MSZ-400

**********************************

 

Machine description: MSZ-400.

Machine to manufacture: Construction frameworks - Pillars.

Machine to manufacture: Construction frameworks - Pillars. Model MSZ-400. Reivax Maquinas.

Show video

When one model is replaced by another, all the elements adjust automatically and, in a maximum of 30 seconds, the machine is ready to change the size.
Welding is carried out in milliseconds, so that the frame comes out completely straight, with exact precision in the measurements.
High production and a perfect finish of the pillars.
The machine is easy to use and does not need a qualified operator

 

Machines performance:  MSZ-400.

Machine to manufacture: Construction frameworks - Pillars.

 Pillar size and shape  Programmable
 Estimated time to change the shape      1 minute
 Rod / Pillar Wire:  
    Wire 6 to 12 mm.
     Feeding Manual
     Length      1 to 6 m.
 Stirrup Rod / Wire:  
    wire 1 to 6 mm.
    Feeding from uncoiler Wire roll
     Welding type Material contribution
     Size 80 to 600 cm.
     Production + - 1000 / Hour
 The machine:  
     - Measurements: Length - width To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Construction frameworks - Pillars.

MSZ-400

- Customer data: Company, contact person, Web, telephone and e-mail.

- Wire / Rods: Thickness, hardness and specifications.
- Pillars to produce: Drawings, measurements and tolerances.
- Optional: Medium frequency welding (Inverter): Yes or No.
- Optional: Include a straightening and cutting machine to make the rods: Yes or No.
- Optional: Include a motorized uncoiler for wire roll: Yes of 1000. 2000, 3000 Kg. or No.
- Additional comments:
     - Voltage.
     - Production estimates: Pillars / Hour
     - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

MTM-450

**********************************

 

Machine description: MTM-450.

Machine to manufacture: Construction frameworks - Stirrups.

Machine to manufacture: Construction frameworks -  Stirrups - Model MTM-450. Reivax Maquinas.

Show video

This machine has 5 hydraulic carriages to form the frames.
In the last operation we make the welding with great quality equipment.
Attached to one side of the machine there is a precision numerical control feeder and a straightening box, consisting of a rotary straightener with 7 rotary nozzles.

 

Machines performance: MTM-450.

Machine to manufacture: Construction frameworks - Stirrups.

 Feeding Wire roll
  Wire / Rod: 4 to 8 mm
 Wire type Corrugated
 Wire / Rod: Hardness 800 N/mm2
 Programmable stirrups size 80 to 400 cm
 Hydraulic cars 5
 Straightener 5 rotating nozzlest
 Tipo soldadura Material contribution
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Machine to manufacture: Construction frameworks - Stirrups.

MTM-450
- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
- Wire parts to produce: Drawings, measurements and tolerances.
- Option: Include a motorized uncoiler for wire roll: Yes of 1000. 2000, 3000 Kg. or No.
- Additional comments:
         - Voltage
         - Production estimates: Parts / Hour.
         - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

R6-200

**********************************

 

Machine description: R6-200.

CN machine to bend wire and manufacture 2D and 3D parts.

CN machine to manufacture: 3D wire parts. 14 axis. Model R6-200

Show video

The Machine:
   It is a versatile, flexible, fast and programmable wire bender.
   A head controlled to CN, houses six rotating bending tools that allow infinite positions to configure the pieces.
   The change of part model, once programmed and stored is instantaneous, it is not necessary to stop the machine unless the thickness of the wire is changed.
   Optionally you can incorporate a turret with additional accessories:
   Reel, wedge and extraction clamp.
   It consists of: a bench, CN drag box and wire straightener, folding mechanisms, finishes and ejection, an electrical panel and a touch screen.
   It is fed from roll and optionally can complement the machine with a motorized winder.
   It is characterized by precision, high production and high quality finishes.
It is governed by a PLC:
   It is programmed from touch screen.
   The programming is sequential, fast, easy and open. It is designed so that the operator can create or modify all operating cycles, movements and times.
   It allows storing the programmed models.
   All the necessary information of the production and incidents is displayed on the screen.
   It allows an easy and quick change of models.
   It has a remote control module installed, to be operated via the internet.
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machines performance: R6-200.

CN machine to bend wire and manufacture 2D and 3D parts.

Installed potency Wire roll
 Precision feedeng box +- 0,1 mm
  Wire 2 to 6 mm
 Wire / Rod: Hardness 1200 N/mm2
 Bending heads:  
      - Quantity 6
      - Precision +-  0,02
      - Sections of parts to be manufactured  +- 200 mm
 Core folding radii 1 to 10 mm
 Folding radii for generation 10 mm to infinite
 CN Axis  14
 Start-up time:  
     - Without changing the thickness of the wire  0 minutes
     - With change of wire thickness 10 minutes
 Parts finishes: Thread, chamfer, bevel, press, weld, others Optional
 Sequential movement programming Yes
 Manual programming of movements Yes
 CN Axis Yes
 Store the programmed models Yes
 Remote control Internet Yes
 External adjustment button Yes
 The machine:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency +-  37 Kw.
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

CN machine to bend wire and manufacture 2D and 3D parts.

R6-200

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rod: Thickness, hardness and specifications.
 - Wire parts to produce: Drawings, measurements and tolerances.
- Option: Tower with accessories: SI or NO.
- Option: Wire motorized uncoiler: YES of 1000 / 2000 / 3000 Kg. or NO.
- Additional comments:
         - Voltage
          - Production estimates: Parts / Hour
          - Special needs.

Contact: info@reivaxmaquinas.com - Form

 

**********************************

RSC-10-L

**********************************

 

Machine description: RSC-10-L.

Head to make threads by end lamination of the wire rod.

Head to make threads by end lamination of the wire rod. Model RSC-10-L. Reivax Maquinas.

Show video

The wire thread is a self-contained unit that serves to make the threaded by rolling at the end of the rod.
It is mounted on a frame and equipped with a head, electrical panel, control screen.
The threading head:
   Depending on the metric, 2 or 3 tapping rollers are mounted.
   It makes threads with rapidity, great precision and perfect finish.
   It is robust, reliable, precise and with minimal maintenance.
   It has an adjustable sprayer for greasing the rod.
It can be equipped with:
   A pneumatic clamp (optional) to fix the rod and lengthen the life of the cutting blades.
   An automatic trigger stop (optional) to speed up the tapping maneuver.
Communicates with a PLC
It incorporates passive safety systems and manual emergency stop.
It complies with European regulations approved and required by the EC: Machines 98/37 / CEE.
It is a robust, productive and minimal maintenance machine.

 

Machines performance: RSC-10-L.

Head to make threads by end lamination of the wire rod.

  Wire / Rod 3 to 10 mm
 Threads Lamination
 Threads: Metric M-3 to M-10
 Threads: Length Up 12 mm
 Example speed: M6 x 10 mm 0,3 seconds
 The head:  
     - Measurements: Length - width - height To consult
     - Weight To consult
     - Installed potency To consult
     - Voltage On request

 

Information needed to make an inquiry or request a quote.

Head to make threads by end lamination of the wire rod.

 RSC-10-L

- Customer data: Company, contact person, Web, telephone and e-mail.
- Wire / Rods: Thickness, hardness and specifications.
- Wire parts: Drawings, measures and tolerances.
- Tool for thread for lamination: Metrics and length.
  Additional comments:
      - Voltage
      - Production estimates: Parts / Hour
      - Special needs.

 

Contact form Reivax Maquinas (*)

To answer your questions and / or send a estimate we will need:

Contact information, requirements, comments and drawings.

Company
Person
Country
Phone
E-mail
Web
Topic
Comments

 

(*) Necessary information                

 

   Reivax Mquinas S.L.

www.reivaxmaquinas.es  

Logo Reivax Mquinas. Machine factory to manufacturing wire parts. Barcelona - Spain.
 Wire forming machines manufacturer
3, St. Francesc  ES-17400 Breda (Girona) Spain
Phone (+34) 972.870.258 -  Information and estimates: Contact
The Company  Menu  Machines  Accessories  Location  Contact  Webmap

 

Reivax Maquinas - Wire forming machines manufacturer to produce 2D and 3D parts.

Menu

Manufacturing wire parts Wire bending Straighten and cut
Wire welding Motorized uncoilers Feeders
Heads  Contact English - Espaol