HS-4 / HS-8 Ø 1 to 8 mm |
|||
CN machine for straightening and cutting short sections of wire rod. |
|||
See details & video | Gallery | Download brochure | Contact |
Programmable CN machine to straighten and cut high speed wire sections. Up to 1000 cuts per minute with a clean cut and precision of + - 0.15 mm. |
CN machine for straightening and cutting short sections of wire rod. |
CN machine for straightening and cutting short sections of wire rod. |
It is a CN machine and programmable from a touch screen. |
It is designed to cut short sections of rod at a very high speed, synchronizing the cutting blades with the feed of the rod getting this system a clean cut. |
It is mounted on a bench equipped with an electrical panel, an extendable control, a drag box, a straightener, cutting mechanisms and expulsion of the cut rod. |
It is fed by a coil of wire from a motorized winder. |
The straightener can optionally be roller or rotary with nozzles. |
The roller straightener provides more speed and the rotary straightener more perfection. |
There are different models of machines depending on the thickness of the wire and the straightening system. See attached table. |
The machine can make up to 1000 cuts per minute, the production of rod sections is conditioned to the machine model, the thickness of the wire, the straightening system and the length of the sections to be cut. See attached table. |
It is characterized by: |
- The accuracy of the cut length: +- 0.15 mm. |
- No physical stops are required. The length is programmable from the touch screen. |
- It allows to modify the length of the sections in 10 seconds. |
- A clean cut. |
- The feeding speed is adjustable. |
- Versatility and ease in changing the length of the rod and/or thickness. |
It is governed by a PLC. |
It is programmed from a touch screen. |
The programming: |
- It is very fast, easy and open. . |
The screen: |
- Visualizes all the necessary information of the production and incidences. |
It has installed a remote control module to be operated via Internet. |
It incorporates systems of passive security and manual stop of emergency.. |
Complies with European regulations approved and required by the CE: Machines 2006/42/CE. |
It is a robust and productive machine with minimum maintenance. |
Model | Straightener | Ø Wire |
HS-4-R | Rollers | 1 to 4 mm |
HS-8-R | Rollers | 2 to 8 mm |
HS-4-G | Rotary | 1 to 4 mm |
HS-8-G | Rotary | 2 to 8 mm |
Models HS-4-R & HS-8-R | Models HS-4-G & HS-8-G | ||
Roller Straightener | Rotary straightener | ||
Length in mm | Cuts / Minute | Length in mm | Cuts / Minute |
3 to 40 | 1000 | - | - |
10 to 300 | 600 | 10 to 200 | 600 |
300 to 350 | 500 | 200 to 250 | 500 |
350 to 450 | 400 | 250 to 350 | 400 |
450 to 600 | 300 | 350 to 400 | 300 |
600 to 1000 | 200 | 400 to 600 | 200 |
- | - | 600 to 800 | 150 |
- | - | 800 to 1000 | 120 |
CN machine for straightening and cutting short sections of wire rod.
Model | Straightener | Ø Wire |
HS-4-R | Rollers | 1 to 4 mm |
HS-8-R | Rollers | 2 to 8 mm |
HS-4-G | Rotary | 1 to 4 mm |
HS-8-G | Rotary | 2 to 8 mm |
Machine model | On request |
Feeding | Wire roll |
Wire / Rod: | |
- Ø Thickness 1 to 8 mm | According to the model |
- Rod hardness | 800 N/mm2 |
- Straightener: Rollers or Rotary | According to the model |
CN - Numerical Control | Yes |
Touch screen programming | Yes |
Cutting rod: | |
- Minimum length | 1 mm |
- Maximum length | 1000 mm |
- Length: physical stop | Not necesery |
- Cuts per minute | See attached table |
Maximum cutting speed / minute | 1000 |
Time to change: | |
- Rod length (Programmable) | 10 seconds |
- Thickness of the wire | +- 15 minutes |
Rod Cutting | Servomotor |
Length accuracy | +- 0.15 mm |
External encoder | Yes |
Servos | Yes |
Programmable PLC | Yes |
Communication | Ethernet |
Touch Screen | Yes |
Extendable control | Yes |
Remote control (Internet) | Yes |
The machine: | |
- Measurements: | To consult |
- Weight | To consult |
- Installed power | To consult |
- Input voltage | On request |
Documentation: Spanish or English | On request |
Machine certifications (Reference and country) | On request |
External risk assessment (Pilz) | On request |
Time to manufacture | +- 5 months |
Complements for the installation: | |
- Motorized decoiler 1000 Kg | Optional |
Models HS-4-R & HS-8-R | Models HS-4-G & HS-8-G | ||
Roller Straightener | Rotary straightener | ||
Length in mm | Cuts / Minute | Length in mm | Cuts / Minute |
3 to 40 | 1000 | - | - |
10 to 300 | 600 | 10 to 200 | 600 |
300 to 350 | 500 | 200 to 250 | 500 |
350 to 450 | 400 | 250 to 350 | 400 |
450 to 600 | 300 | 350 to 400 | 300 |
600 to 1000 | 200 | 400 to 600 | 200 |
- | - | 600 to 800 | 150 |
- | - | 800 to 1000 | 120 |
- Company | ................... |
- Identification | ................... |
- Country | ................... |
- Contact person | ................... |
- Telephone contact | ................... |
................... | |
- Web | ................... |
CN machine for straightening and cutting short sections of wire rod.
Machine model | ................... | |||||||||||||||
|
||||||||||||||||
Wire / Rod: | ||||||||||||||||
- Ø Thiechness | ................... | |||||||||||||||
- Hardness | ................... | |||||||||||||||
- Specs | ................... | |||||||||||||||
Rod sections: | ||||||||||||||||
- Minimum length / Cuts per minute | ................... | |||||||||||||||
- Maximum length / Cuts per minute | ................... | |||||||||||||||
Additional comments: | ||||||||||||||||
- Input voltage | ................... | |||||||||||||||
- Documentation language: Spanish or English | ................... | |||||||||||||||
- Special needs |
................... | |||||||||||||||
- Certifications (Normative reference and country) | ................... | |||||||||||||||
- External risk assessment (Pilz) | Yes o No | |||||||||||||||
Optional add-ons for installation: | ||||||||||||||||
- Motorized decoiler 1000 Kg | Yes o No |
(*) Upon receipt of the detailed information, our technical department will be able to answer your query: |
- Spain office hours: from 8:00 to 13:00 and 15:00 to 18:00 |
- Mail: info@reivaxmaquinas.com Phone (+34) 972.870.258 |
- WhatsApp video call: (+34) 687.67.34.10 |
- Skype video call: REIVAX MAQUINAS |
HS-4 / HS-8 Ø 1 to 8 mm |
|||
CN machine for straightening and cutting short sections of wire rod. |
|||
See details & video | Gallery | Download brochure | Contact |
Programmable CN machine to straighten and cut high speed wire sections. Up to 1000 cuts per minute with a clean cut and precision of + - 0.15 mm. |
|